linux操作系统中,让CPU利用率占满的命令:
for i in `seq 1 $(cat /proc/cpuinfo |grep “physical id” |wc -l)`; do dd if=/dev/zero of=/dev/null & done
cat /proc/[……]
linux操作系统中,让CPU利用率占满的命令:
for i in `seq 1 $(cat /proc/cpuinfo |grep “physical id” |wc -l)`; do dd if=/dev/zero of=/dev/null & done
cat /proc/[……]
影响和修复的 vCenter Server 版本:
版本受影响的版本固定版本发布日期VAMI/发行说明
内部版本Client/MOB/vpxd.log
内部版本编号 7.0 7.0 U1c 之前的所有版本 7.0 U1c(或更高版本)2020-12-171[……]
执行以下步骤:
/etc/init.d/slpd stop
注意:仅当 SLP 服务未在使用中的时候才能将其停止。使用以下命令可查看服务位置协议守护进程的运行状况:
esxcli system slp stat[……]
端口协议源对象目的9UDPvCenter ServerESXi 主机由 Wake on LAN 使用。22TCPSSH 客户端ESXi 主机SSH 访问需要使用此端口53UDPESXi 主机DNS 服务器DNS 客户端68UDPDHCP 服务器ESXi 主机适用于 IPv4[……]
思科交换机巡检命令
1、show interface stats:查看交换机所有接口当前接口流量
2、show running-config:查看当前设备配置
3、show version:查看IOS版本信息及设备正常运行时间
4、show clock:查看设备时钟信息
[……]
现有一台服务器,安装Vmware Esxi6.5,事件日志中传感器System Management Module 2 Event Log的运行状态为黄色,显示有告警。
接服务器管理口发现硬件状态正常,将硬件日志清除后,在esxi中执行命令localcli hardware ipmi sel[……]
This article applies to legacy BIG-IP platforms supported by BIG-IP 9.x through 11.1.0. For information about the LED behavior for current pl[……]
This article applies to BIG-IP iSeries hardware platforms.
The LCD panel provides the ability to manage and monitor the unit without[……]
You should consider using this procedure under the following condition:
Prer[……]
When a BIG-IP system transitions from active to standby state or standby to active state, a message is displayed on the LCD display indicatin[……]